equipment second to none,
come and get some

800-505-5058

Now with new Touchscreen Interface, eCal Auto-Calibration, & Superior Alloy Shaft!

more info

1/2in Air Operated Diaphragm Pumps

1in Diaphragm Pump Outfits

Aluminum Antifreeze/Windshield Wash Mixing Outfit

more info

ADG LW-100 Brake Lathe

Machine shop performance in an economy package.

more info

ADG LW-200 Brake Lathe

Infinite variable feed speeds, four arbor speeds...the ultimate in machining versatility.

more info

ADG Model 200SS

You asked us for a dependable, quality, service jack that’s lightweight. ADG delivers with our Model 200SS jack that gives you ADG’s double-pumper advantage for quicker lifting efficiency - just five strokes to its 19” maximum height.

more info

ADG Model 2158

Professional duty 1,100 lb. capacity transmission jack. Single-stage telscopic ram for economical use for automobile, light truck and van transmissions, transfer cases or differentials in under-hoist applications.

more info

ADG Model 2195A

2,200 lb. capacity two-stage telescopic ram designed for heavier auto and truck transmissions, transfer cases or differentials

more info

ADG Model 3003

Value and efficiency in a double-pumper jack, the Model 3003 will get the load in the air faster and safer. With ADG’s double pumper advantage and safety overload system, it’s the type of workhorse jack DIYs and weekend mechanics want.

more info

ADG Model 3130

10 ton capacity heavy duty long-chassis jack

more info

ADG Model 3140

20 ton capacity heavy duty long-chassis jack

more info

ADG Model 3190B

1,100 lb. capacity telescopic transmission jack. Air or manual foot operated, two-stage ram frees both hands for easier saddle-to-transmission alignment for automotive, van, and light truck transmissions, transfer cases or differentials in under-hoist applications.

more info

ADG Model 3198 Fuel Tank Adapter

Converts Model 3190B, 3192A and 2195A transmission jacks to remove and install fuel tanks, trailer hitches, and running boards. 80 lb. capacity.

more info

ADG Model 350GT

ADG’s Model 350GT 3 1/2 ton professional heavy-duty floor jack is forge-tough for daily service use. It’s found a home in tire shops, repair facilities and roadside assistance situations - any place where ruggedness, strength and durability are required.

more info

ADG Model 350SS

ADG’s Model 350SS 3 1/2 ton heavy-duty double-pumper floor jack give you all the features of our Model 350GT with additional speed and efficiency, thanks to AFF’s double-pumper advantage for quicker lifting.

more info

ADG Model 3580A Engine Crane

A high capacity crane with added boom length, ADG Model 3580A is a workhorse strong enough to efficiently lift and transport large truck and heavy equipment engines.

more info

ADG Model 3598 Bumper Jack

This ADG Air End Lift is designed with an extra-wide stance to lift the entire front or rear of large trucks, heavy-duty construction equipment, buses and large farm vehicles in repair or service facilities

more info

ADG Model 3700 “Clutch Hound” Jack

By making truck clutches up to 15.5” diameter more efficient for one shop technician to remove, install and transport, the new ADG Model 3700 “Clutch Hound” Jack is sure to become a mechanic’s best friend

more info

ADG Model 3988 Engine Crane

Similar to Model 3580A but foldable for storage in limited shop spaces.

more info

ADG Model 565E Axle Jack

22 ton capacity air-hydraulic axle jack.

more info

ADG PK-16

Heavy duty 16,000 lb. capacity open top 2-post lift with hydraulic equalization.

more info

ADG PK-16E

Heavy duty 16,000 lb. capacity open top 2-post lift - PLC Controlled.

more info

ADG Stationary Workbench

ADG Heavy Duty Stationary Workbench

more info

AFF Model 3309A

10 ton capacity mid-rise truck jack stand

more info

AFF Model 3310A

10 ton capacity high-rise truck jack stand

more info

AFF Model 3312

Heavy duty 12 ton capacity truck jack stand

more info

AFF Model 3315A

4000 pound capacity under-hoist stand

more info

AFF Model 3320A

1650 pound capacity under-hoist stand

more info

AFF Model 3830

12 Ton Capacity Bench Press

more info

AFF Model 812

12 Ton Capacity Floor Press

more info

AFF Model 820A

20 Ton Capacity Floor Press

more info

AFF Model 832A

30 Ton Capacity Floor Press

more info

AFF Model 837

50 Ton Capacity Floor Press

more info

AFF Model SS3/SS6

3 ton or 6 ton capacity jack stand

more info

AFF Multi Purpose Bench Vises

Model 3194 - 4” Jaw Width Model 3195 - 5” Jaw Width Model 3196 - 6” Jaw Width

more info

AFF Swivel Bench Vise Model 3197

5” Jaw Width Extra Large Anvil Work Surface

more info

AFF Swivel Bench Vises

Model 3204 - 4” Jaw Width Model 3205 - 5” Jaw Width Model 3206 - 6” Jaw Width Model 3208 - 8” Jaw Width

more info

Ammco 4000

It's simple. It's fast. It's very precise. AMMCO combination brake lathes support rotors or drums using a standard one inch arbor. And like all AMMCO brake lathes, it almost never breaks down. It's no wonder that the 4000B has been a favorite of brake technicians everywhere since its introduction five decades ago.

more info

Ammco 4000sp

It's more efficient than ever because it integrates single speed spindle and feed rates for one pass precision finishes. Technicians can turn standard work quicker and easier. The 4000-SP uses positive rake toolbits for quality cuts you can see, time after time. The result of this simplification is one of the most accurate, durable, and easy-to-use machines you could ever put into your shop.

more info

Ammco 4100B

The 4100B expands on the 4000B, initially introduced four decades ago. Since then, it has been the primary choice for brake technicians who manage a large quantity of medium-duty trucks. And for good reason. It's simple. It's fast. It's very precise. The speed control allows technicians to fit in more customers each day without loss of quality finish. And the added 9.875 inches of drum capacity doesn't hurt.

more info

Ascent Systems Apex Rail

Provides professional appearance in the service area.

more info

Ascent Systems High Reach

For use with trucks and oversized vehicles.

more info

Ascent Systems Vacuum Holster

The Ascent Vacuum Holster uses the negative pressure of the exhaust fan to assist in hose retraction, providing easier operation than telescopic hose drops - at comparable cost.

more info

Auto Arc XLT-142

115 Vac, Single-Phase Wire Welding Package.

more info

Auto Arc XLT-182

230 Vac, Single-Phase Wire Welding Package.

more info

Auto Arc XLT-222

Complete Single-Phase MIG Welding Package.

more info

Auto Arc XLT-270

The Auto Arc XLT 270 is a powerful welding unit that is versatile and easy to use. Great in a manufacturing environment or truck and frame shops.

more info

Ben Pearson BP-79 Pipe Bender

If you're looking for a powerful bender that's got the features you need to get the job done, take a long look at the BP-79 from Ben Pearson. It'll give you all the power you need at an affordable price.

more info

Ben Pearson MB-97 Pipe Bender

If you were under the impression that you had to invest a lot of cash to get a solid bender, loaded with the features you need, we're about to prove you wrong. Just check out the automatic features on Ben Pearson's MB-97 -- automatic depth of bend, automatic ram retraction, automatic motor cut-off, and that's just the beginning list of features.

more info

Ben Pearson MC-59 Pipe Bender

Incorporating state-of-the-art technology, the MC-59 pipe bender leads the industry in operator convenience features --- 180 degree bend on 5" radius, 3" bending capability and a rugged electrical and hydraulic system that will perform over the long haul. The MC-59 from Ben Pearson is truly the "TOP GUN" in the exhaust service repair industry.

more info

Branick 7400 Strut Compressor

Branick has been supplying Strut service tools for over 30 years! With that kind of experience Branick can supply the best equipment to handle the wide variety of suspension systems.

more info

Champion Advantage Series:

The Champion Advantage Series is the newest thinking in delivering fully equipped reciprocating compressors from the recognized leader in compressed air equipment.

more info

Champion Duplex Series

For extra air delivery when you need it without wasted space. Plus the flexibility of single operation, alternating between compressors, or duplex operation to meet high air demand. Available 2 - 30 hp.

more info

Champion Evolution

Champion Evolution Compressors provide the advantages of a reciprocating compressor coupled with less noise and vibration. Loaded with rugged features, these compressors deliver high performance and tremendous value. As a result, Evolution compressors offer long, trouble-free service with maximum operating efficiency.

more info

Champion LV Series

Rotary Vane Air Compressors

more info

Champion Value Plus Series

The Champion Value Plus was engineered for industrial applications that require a gas or electric driven unit. The Value Plus has a single and two-stage, 100% cast iron compressor pump.

more info

Clean Burn 1400 Furnace

The Clean Burn Model CB-1400 is the smallest and most economical Clean Burn used-oil furnace in terms of initial cost. It produces approximately 140,000 BTU/hr. and is ideal for small garages, shops, and workspaces.

more info

Clean Burn 1750 Furnace

The Clean Burn Model CB-1750 produces approximately 175,000 BTU/hr. and is the smallest of the low profile designs, making it ideal for numerous applications and convenient installations. As a broad guideline, the Model CB-1750 is suitable for facilities generating smaller quantities of used oil annually.

more info

Clean Burn 2500 Furnace

The larger of the two Clean Burn low profile models, the Model CB-2500 used-oil furnace produces approximately 250,000 BTU/hr and is extremely popular at facilities such as 2 to 4 bay auto repair and truck service shops.

more info

Clean Burn 3500 Furnace

The Clean Burn Model CB-3500 is an industrial grade used-oil furnace for service facilities with four or more bays and where larger quantities of used oil are generated or collected. The CB-3500 generates approximately 350,000 BTU/hr and is UL listed for use as either a unit heater or central (ducted) furnace.

more info

Clean Burn 5000 Furnace

The Clean Burn CB-5000 is the largest used-oil furnace the EPA allows. No other unit is as robust and reliable for extracting free heat from used oils. The CB-5000, which generates approximately 500,000 BTU/hr, is the choice for large repair and service facilities with multiple bays where larger quantities of used oil are generated and/or collected.

more info

Clean Burn Recycling Center

When used in combination with a Clean Burn furnace, a state-of-the-art Clean Burn Recycling Center is the ideal system for collecting, storing and generating heat recovered from used oils. The Clean Burn Recycling Center works with most Clean Burn used-oil furnace models and provides a 250 gallon storage tank.

more info

Coats 4050A

Air powered, single-stage center-post tire changer.

more info

Coats 5030E

The Model 5030 is our base model of “Rim Clamp" tire changer. But that doesn't mean it's a stripped-down unit with limited capacity.

more info

Coats 700 Wheel Balancer

The Coats Model 700 balancer is ideal for cost conscious shops, or shops that occasionally balance wheels.

more info

Coats Model #111559

Light truck cone kit for wheel balancers 4.61" to 6.75"

more info

Coats Model #182963

Plastic inserts for 182788 metal Mount/Demount head. Quantity of 12.

more info

Coats Model #3008403

Plastic Duckhead, 9010 only, no adapter

more info

Corghi Artiglio Master

"Just program the wheel size into the computer and Artiglio Master will finish the job!"

more info

Deluxe Enclosed Hose Reels

All Signature Series styles and lengths available.

more info

DeWalt 8in Heavy Duty Bench Grinder

Superior power for industrial grinding applications.

more info

Digital Control Handle

Low cost, electronic register.

more info

EnergyLogic EL-140H

Heats up to 3500 Square Feet.

more info

EnergyLogic EL-200H

Heats up to 5000 Square Feet.

more info

EnergyLogic EL-340H

Heats up to 8500 Square Feet.

more info

EuroVent

The Euro-style state-of-the-art system for efficiently removing toxic exhaust fumes from auto repair facilities and dealership service departments.

more info

Firepower FP160 MIG/FLUX Cored Welding System

Firepower, (a Thermadyne company) is an industry leader with truly innovative design and years of experience. They manufacture a full range of welding and cutting products and have a proven record of performance and dependability.

more info

Firepower FP260 Welding System

Firepower, (a Thermadyne company) is an industry leader with truly innovative design and years of experience. They manufacture a full range of welding and cutting products and have a proven record of performance and dependability.

more info

Forward BP9

The BP9 is perfect for customers who need a two post lift. Have low ceilings? Not a problem for the BP9! The BP9's overall height is 111 1/4 inches tall. That means it will fit, even if you have 10 foot ceilings.

more info

Forward DP15

2-post lift with 15,000 lbs capacity. Symmetrical column design, comes with four 5" and four 10" truck adapter extensions allowing you to lift a range of vehicles on the road today.

more info

Forward I10

2-post lift with 10,000 lbs capacity. The I10 features low-profile/oversized pads with multiple extensions to raise most vehicles on the road today.

more info

Forward I12

12,000 lbs. capacity for raising most passenger cars, trucks and vans.

more info

Full-Rise Mobile Columns

Lift virtually any vehicle, anywhere, for inspection or service.

more info

Haweka Quick Plate Kit

Covers all current and future passenger vehicle bolt patterns!

more info

Heavy Duty 4-Post

Available in up to 80,000 lb. capacities.

more info

Hunter Auto 28

Leverless Center-Clamp Tire Changer

more info

Hunter Auto 34

Easiest operation in its class!

more info

Hunter BL505 Brake Lathe

Choice of Brake Lathe Tooling Positive rake tooling ships standard with all lathe packages; negative rake tooling is available as an option
Hunter Pro Self-Aligning Wrenchless Arbor Nut Allows for quick setup while removing risk of potential overtightening and minor mounting errors.

more info

Hunter DSP7705 Wheel Balancer

Hunter's DSP7705 wheel balancer is perfect for the quality-conscious, economically oriented shop with a lower volume of service.

more info

Hunter DSP9200 Wheel Balancer

Key Features including: Easy-to-use display panel, CenteringCheck Verification, Split Spoke & Split Weight Modes, Quick-Thread Auto-Clamping, and Spindle Lock Brake Feature.

more info

Hunter ForceMatch HD

Hunter's first off the vehicle, heavy duty wheel balancer and force matching system.

more info

Hunter HawkEye Alignment

Hunter’s new HawkEye high-definition digital imaging alignment system employs patented technology to offer shops the multiple benefits of precision, high-speed alignment and greater productivity, while using a minimum amount of bay space.

more info

Hunter HawkEye Elite

Hunter's HawkEye Elite Wheel Aligner: Greater profit and productivity through innovation.

more info

Hunter L441

Hunter 18,000lb. 4 Post Open-Front Lift.

more info

Hunter L444

Hunter 18,000 lb. 4 Post, Closed-front lift.

more info

Hunter OCL410 and OCL430MD Brake Lathes

Today’s sensitive vehicles, evolving brake components and the increase of hubbed rotors on Sport Utility Vehicles demand different service procedures and equipment. Although bench lathes will continue to serve a primary role, they are no longer the only lathe needed in today’s professional brake shop.

more info

Hunter Presto

Hunter Alignment System

more info

Hunter ProAlign

ProAlign offers shops alignment service optimized for speed and efficiency with simple operation and low cost of ownership.

more info

Hunter Quick Check

The quickest way to check tire wear angles.

more info

Hunter QuickMatch

The Hunter QuickMatch features SmartWeight, Runout Measurement, TPMSpecs, TranzSaver, & a HammerHead Option!

more info

Hunter Revolution

Fully automatic & easy to use.

more info

Hunter Road Force Touch- GSP9700

Now with more speed, touchscreen interface, eCal Auto-Calibration, Auto-Up Hood, & BullsEye Centering System!

more info

Hunter RX10

Hunter 10,000lb. Scissor Lift Rack

more info

Hunter RX12

Hunter 12,000lb. Scissor Lift Rack

more info

Hunter RX16

Hunter 16,000lb. Scissor Lift Rack

more info

Hunter SmartWeight Touch

Now with new Touchscreen Interface, eCal Auto-Calibration & Superior Alloy Shaft.

more info

Hunter TC3300

A New Generation of Center-Clamping Tire Changers

more info

Hunter TC3700

The World Standard in Performance Wheel and Tire Handling

more info

Hunter TCX50

Conventional Tire Changer

more info

Hunter TCX51

Conventional Tire Changer with Bead Press Arm

more info

Hunter TCX53

Conventional Tire Changer with Bead Press System

more info

Hunter TCX575 and TCX565

Advanced Conventional Tire Changing Systems

more info

Hunter TCX620HD

Compact-Design Optimized for Over-the-Road Truck Tires & Rims

more info

Hunter TCX640HD

The Hunter TCX640HD is an efficient electro-hydraulic-powered tire changer that combines a range of unique features and capabilities to make wheel service for trucks, buses, tractors, and other specialized machinery faster, easier and more profitable.

more info

Hunter Wheel Stands

Hunter wheel stands for frame contact lift allow any shop to get started in the alignment business with an absolute minimum investment.

more info

Hunter WinAlign HD

Hunter's new DSP760T heavy-duty alignment sensors reduce setup time and provide accurate alignment readings.

more info

HWA-HW93642

2-Ton service jack.

more info

John Dow 20 Gallon Oil Change Station

Designed for the high volume automotive service facility

more info

John Dow 25 Gallon Gas Caddy

Two-way heavy-duty rotary pump for siphoning or dispensing.

more info

Lincoln Power MIG 215

Featuring Diamond Core Technology, the Power MIG 215 delivers a forgiving arc, excellent out-of-position arc action, a wide voltage sweet spot at a given wire feed speed and low splatter

more info

Lisle 18 Gallon Oil Lift Drain

Translucent jug holds 18 gallons and will not warp with hot oil.

more info

Lube Console

The reliable alternative to hose reels. For quick lubes or other installations where a basement pit space is available.

more info

M-SET Mechanical Preset Control Handle

Three mechanical counters to decimal tenths unit.

more info

M-SET Mechanical Preset Control Handle

Three mechanical counters to decimal tenths unit.

more info

Mid-Rise Mobile Columns

31.5” rise height makes these columns ideal for wheel and drive train service.

more info

Mondolfo 3100

Low Volume, Full Featured, Manual Parameter Entry.

more info

Mondolfo 3200-2D

Smaller Cabinet- Semi Automatic Data Entry

more info

Mondolfo 3200-3D

Smaller Cabinet- fully automatic data entry.

more info

Mondolfo 3350-2D

High Volume- SemiAutomatic
Laser Weight Placement- 2D

more info

Mondolfo 3350-3D

High Volume Automatic, Laser Weight Placement- 3D Auto

more info

Mondolfo 912

Swing Arm Standard- Superior Construction, Entry Level Operation

more info

Mondolfo 912HP

Swing Arm High Performance- Simplicity with Max Performance

more info

Mondolfo 914

Swing Arm, Extended Range-Larger Rim Widths, Larger Outside Clamping.

more info

Mondolfo 944HP

Pneumatic Tilt with Bead Assist

more info

Mondolfo G-112

Swing Arm Economy: Economical Price-Industrial Performance

more info

Mondolfo G-112HP

High Performance Economy Swing Arm

more info

Mondolfo G240

Imported Economy Balancer

more info

Mondolfo Raptor

Ultimate in Leverless Performance

more info

Non-metered Control Handle

Available in automatic or semi-automatic tip

more info

Oil Bar

Point-of-use dispensing of motor oil, ATF, coolant, gear oil, or w/w fluid for hand-carried containers.

more info

OTC Genisys Scan Tool

If you're frustrated trying to read and understand the text displays on conventional scan tools, then the advanced Genisys Scan-tool will be a real eye-opener. Only Genisys gives you the diagnostic data, detail and color display that lets you work quickly to repair customer vehicles.

more info

OTC Model 1728

Unique foot pedal design gives you complete control over the air-driven first stage to rapidly raise the mounting head to the transmission; second stage is hydraulically actuated - permitting precise operator control during removal and installation.

more info

OTC Model 1791

Universal mounting head provides wide fore and aft tilt range, making alignment of transmission easier.

more info

OTC Model 1833

25 Ton Capacity Shop Press with hand pump

more info

OTC Model 1850

55 Ton Capacity Shop Press with hand pump

more info

OTC StrutTamer Strut Compressor

Simply the most effective compressor for virtually any straight, conical, or offset spring.

more info

OTC Three-Bar Engine Support

700 lb. capacity

more info

OTC Transfer Tanker

Collect used oil in the 17-gallon reservoir.

more info

P-Set Electronic Preset Control Handle

6 digit LCD display to decimal hundredth unit.

more info

Panther 3:1 Premium Drum Mount Outfit

Includes bare pump and 4410-027 Accessory Kit.

more info

Panther 3:1 Pumps

Used for distribution to 500 ft and up to 3 reel simultaneous service - medium to high usage.

more info

Panther 5:1 Premium Drum Mount Outfit

Includes bare pump and 4410-028 Accessory Kit.

more info

Panther 5:1 Pumps

Used for distribution to 700 ft and up to 2 reel simultaneous service - low to medium usage.

more info

PGM-40 Mechanical Control Handle

Mechanical 4 digit counter.

more info

Poly with Washer Dispense Outfit

Standard Features:

  • 1/2” poly diaphragm pump
  • Suction hose
  • 5’ air hose
  • 4’ fluid hose
  • Filter regulator
  • Wall mount bracket

more info

Premium Duty Drains

23 gallon capacity

more info

Premium Series Open Hose Reels

The Premium Series offers superior performance and exceptional value in a full range of model choices with 30, 40, 50, & 60 ft. hoses. Bare reel models are also available.

more info

Pro Cut PFM 9.2 Family

The PFM 9.2 DRO base unit is the midsized lathe with all the bells and whistles including fixed-post trolley, speed-lock cutting head, and electronic reporting that monitors lathe use, efficiency, and ROI.

more info

Pro Cut Warthog

The Pro-Cut Warthog Rotor Matching System is arguably the most rugged on-car lathe in the world. It was engineered to cut the biggest vehicles and withstand the most rigorous use, and its modular design lends itself to fast and simple maintenance and repair. In short, the Warthog might be the last on-car lathe you ever buy.

more info

ProAIR

ProAIR: Compressed Air Piping System

more info

Pump Sentinel Console

Allows for controlled dispensing of fluids.

more info

Robinair 34288

The Cool-Tech 34288 combines simple operation with superior accuracy. It recovers, recycles, evacuates, leak tests, and recharges R-134A quickly and accurately. Meets SAE J-2788 standards for accuracy: 95% refrigerant recovery and charging to +/- 1/2 oz.

more info

Robinair 34788

Combines simple operation with superior accuracy. The Cool-Tech 34788 recovers, recycles, evacuates, leak tests, and recharges R-134a quickly and accurately. Automatic operation means less attention is needed!

more info

Robinair 34988

Fully automatic function lets you recover, vacuum, leak test, charge, and then walk away.

Combines simple operation with superior accuracy. The 34988 recovers, recycles, evacuates, leak tests, and recharges R-134a quickly and accurately. Automatic operation means less attention is needed!

more info

Robinair 92500 Transmission Fluid Exchanger

Three modes of operations: Dipstick only, cooler line, or a combination of the two!

more info

Robinair Refrigerant Identifier Plus

Identifies refrigerant type and purges damaging air. In addition to dependable refrigerant identification, the ID Plus measures non-condensable gases (air) in the refrigerant and purges it directly from the tank or system.

more info

Rotary AR014

14,000 lb. capacity alignment 4-post lift. Model AR14 also available.

more info

Rotary SL210

10,000 lb. capacity Twin-post SmartLift.

more info

Rotary SL212

12,000 lb. capacity Twin-post SmartLift.

more info

Rotary SM014

14,000 lb. capacity general service 4-post lift. Model SM14 also available.

more info

Rotary SM014

10,000, 12,000, and 15,000 lb. capacity EnviroLift Cassette Style Inground Lift.

more info

Rotary SPO12

Rotary SPO12 Two Post Above Ground Lift

more info

Rotary SPOA10

Asymmetric loading 10,000 lb. capacity 2-post lift.

more info

Roughneck II Series Self Evacuating Used Antifreeze Drain

Drain used antifreeze into the 23 gallon reservoir, then connect to low pressure air hose to evacuate oil or antifreeze into any bulk storage tank. No pump required.

more info

Roughneck II Series Self Evacuating Used Oil Drain

Drain used oil into the 23 gallon reservoir, then connect to low pressure air hose to evacuate oil or antifreeze into any bulk storage tank. No pump required.

more info

RTI ArcticPRO RHS980

RTI ArcticPRO RHS980 Digital A/C Refrigerant Handling System. R134A Recovery, Recycling, Evacuation and Recharging.

more info

RTI ATX-2 Transmission Fluid Exchanger

The most technologically advanced transmission machine. Fast, automatic, and accurate fluid exchange.

more info

RTI ATX-2-PS Combination Fluid Exchanger

Combination Unit: Automatic Transmission Fluid & Power Steering Fluid Exchange. Two services, one machine!

more info

RTI ATX-3 Transmission Fluid Exchanger

The first transmission fluid machine to offer fully automatic operation using an accurate exchange process as well as offer the dipstick tube exchange service option.

more info

RTI BFX-1 Brake Fluid Exchanger

The new standard for brake fluid service - fast, simple, effective and profitable! A special push/pull process flushes the entire system and provides the highest quality service. The BFX-1 does the job right!

more info

RTI ELF-1 Leak Finder

The latest advancement in EVAP leak detection. Superior ability to find a wider variety of automotive system leaks.

more info

RTI EV-1 Portable Exhaust

A portable exhaust system.

more info

RTI MCX-2 Multi Coolant Fluid Exchanger

One Machine for the Quickest, Most Complete Exchange - for any Type of Antifreeze.

more info

RTI PSX-1 Power Steering Fluid Exchanger

Offer Power Steering Fluid Exchange Service with this Fast, Reliable and Easy to Operate Machine.

more info

RTI Tech Alert

RTI TechALERT. Technician Productivity Enhancement Technology. It just makes sense - the key to increased productivity is to keep technicians and their machines continually performing value-added work.

more info

RTI VCX-1 Vacuum Coolant Exchanger

Coolant/Antifreeze Service has never been this easy!

more info

ShureShop Advisory Information Module

The Advisory Information Module (AIM) offers an inset countertop for a computer CRT or FLat Screen and a lower shelf for the CPU and printer. The AIM unit is portable with locking casters.

more info

ShureShop Custom Series Workbench

Custom Series Workbenches are engineered for durability and versatility. Available configurations include stationary, portable, or wall-mounted.

more info

ShureShop Custom Series Workbench

Custom Series Workbenches are engineered for durability and versatility. Available configurations include stationary, portable, or wall-mounted.

more info

ShureShop Portable Workbench

ShureShop Workbenches combine heavy-duty steel construction with all-welded legs to increase strength and rigidity.

more info

ShureShop Stationary Workbench

ShureShop Workbenches combine heavy-duty steel construction with all-welded legs to increase strength and rigidity.

more info

ShureShop TC3 System

Shure’s Technician Customer Care Center is the present & future of today’s high-tech maintenance, repair, and service facility. The TC3 System integrates ALL of the essential workspace, storage, tools and equipment that a busy service technician needs to maximize their efficiency and productivity.

more info

ShureShop Tear-Down and Fluid Containment Bench

These versatile and heavy-duty benches ease the task of working with fluid saturated components, assisting in eliminating unsafe spills involved with working on transmissions, small engines, and hydraulic systems.

more info

ShureShop Trans Max Bench

Trans Max benches offer a large 6 ft. sloped working surface and includes a full length trough draining system with drain pipe, two stringers, four heavy -duty swivel casters and an optional 12 inch deep lower shelf.

more info

Signature Series Open Hose Reels

The Signature Series offers dependable performance and outstanding value in a full range of model choices with 30, 40, and 50 ft. hoses. Bare reel models are also available.

more info

Spectrum Series Fluid Inventory Control

Spectrum 100 and Spectrum 50 models available.

more info

Tiger 5:1 Premium Drum Mount Outfit

Includes bare pump and 4410-044 Accessory Kit.

more info

Tiger 5:1 Pumps

Used for distribution to 700 ft and up to 6 reel simultaneous service

more info

Todd Evacuation Caddy

Drain or fill gas tanks with ease. The 28 gallon Evacuation Caddy comes with an industrial grade 2-way rotary hand pump.

more info

Tracerline Complete Leakfinder Kit

Finds all auto links! Pinpoints A/C, Oil, Fuel, ATF, PS, Hydraulics and Coolant Leaks.

more info

Tracerline EZ-Ject

EZ-Ject dye injector is the easiest, most accurate and most compact method of servicing a vehicle’s A/C system with dye.

more info

Used Oil Evacuations Outfit

Ideal for evacuation of pit boss rolling pit drain

more info

Used Oil System

Includes 1” diaphragm pump, spillguard drain, and used oil kit.

more info

WA Model Parts Washer

For passenger and light truck

more info

WA-TR Model Parts Washer

For heavy truck parts

more info

Yellow Jacket 37880

The RMS 37880 Automatic provides full cycle recovery/recycle/evacuate/recharge to bring the vehicle back to factory specifications. Plus, it's fully compliant with SAE J2788 requirements.

more info

Yellow Jacket 37887

Refrigerant Management System

- Approved to SAE J2788 with hybrid addendum

more info